Set Up Alexa Home Theater on Your Fire TV

To create a cinematic surround sound experience through Alexa Home Theater, pair your Echo speakers and an optional subwoofer with your Fire TV device.

Table of Contents

Alexa Home Theater Supported Configurations

You can create Alexa Home Theater by pairing up to five Echo speakers and one optional subwoofer with the following Fire TV and Echo device combinations.

  • Fire TV devices:
    • Fire TV Cube (3rd Generation)
    • Fire TV Stick 4K Max (2nd Generation)
    • Fire TV Stick 4K (2nd Generation)
    • Fire TV Stick 4K Plus
  • Compatible Echo devices:
    • Echo Studio (2025 release)
    • Echo Studio with Home Camera (2026 release)
    • Echo Dot Max
    • Echo Sub

Home Theater To check Fire TV device compatibility with the Echo speakers, go to Alexa Home Theater Compatibility with Fire TV Devices.

Back to top

Basic requirements

To start, have the following set up ready:

Back to top

Video guide to setup your Alexa Home Theater

Back to top

How to set up your Alexa Home Theater

To set up Alexa Home Theater on your Fire TV:

Note: If you have purchased an Alexa Home Theater bundle, you can follow the on-screen instructions to set up your home theater once you complete the Fire TV setup. Otherwise, follow the steps below.

  1. Go to Settings from your Fire TV menu.
  2. Select Display & Sounds.
  3. Select Alexa Home Theater.
  4. Select Create Alexa Home Theater.
  5. Select the compatible Echo speakers. Optionally, you can add a subwoofer.
  6. Follow the on-screen instructions to configure your system. When the setup is complete, your Alexa Home Theater is ready for use. To exit setup, follow on-screen instructions.
    • Note:
      • Place two of your speakers near your Fire TV, ideally on the left and right side.
      • If your Echo speaker has a camera, place it with the clear view of the room so it can sense where you are and adapt your experience.
      • If pairing an Echo Sub, place it on the floor next to the TV.

Back to top

You're Set Up, What's Next?

To optimize your Alexa Home Theater experience, try following:

  1. Go to Settings from your Fire TV menu.
  2. Select Display & Sounds.
  3. Select Alexa Home Theater:
    • Select Audio Output:
      • Select Home Theater to play and control audio through your Echo devices.
      • Select Television to control Alexa Home Theater through your television. Use this option for gaming or latency sensitive use cases.
    • Select Lip Sync Tuning to reduce any audio lags.

If your TV supports HDMI ARC, you can set up Alexa Home Theater with HDMI ARC to play audio from your TV and other HDMI sources (like a game console) play through your Echo speakers. To learn more, visit Initial Set Up for Alexa Home Theater with HDMI ARC on Compatible Fire TV Sticks.

Back to top

Troubleshoot setup issues

To troubleshoot setup issues with Alexa Home Theater, try the following:

  • Confirm that the software on all devices is up to date:
  • Confirm that the Echo speakers are in the same room as your TV with the Fire TV and connected to the same Wi-Fi network.
  • If your Echo speaker doesn't appear on the device selection screen, select Rescan to search for available devices.
  • If your Echo speaker is grayed out on the device selection screen, make sure to select compatible Echo speakers listen in Alexa Home Theater Compatibility with Fire TV Devices.
  • If your Echo Sub doesn't appear on the device selection screen, try the following:
    • If your Echo Sub is already paired with another Echo speaker, it doesn't appear during the setup. Unpair any existing connections before adding your Echo Sub to your home theater system.
    • Restart your Echo Sub. Unplug it from power, wait for 10 seconds, then plug it back in.When the deivce is ready to pair, a small LED next to the power cable blinks orange.
    • Go to the Alexa App and follow Set Up Your Echo Sub.
  • If your Echo Sub displays an updating software message, try the following:
    • When you register Echo Sub on your account through Alexa App, device software will automatically update. It may take 30 minutes or up to 24 hours.
    • Wait for software updates to complete, and then try to set up your Alexa Home Theater with your Echo Sub again.
  • If you experience an issue calibrating your system, try the following:
    • Plug in your Echo speakers and unmute the microphone on all speakers.
    • Check your Echo speakers and subwoofer placement:
      • Place larger Echo speakers in the front of the room, when configuring a varierty of echo speaker types.
      • Place two of your speakers near your Fire TV, ideally on the left and right side.
      • Place your Echo Sub on the floor, next to the TV.
      • Avoid placing your speakers next to noise sources (fans, heaters, air purifiers).
    • Don't obstruct your speakers or place them in enclosed spaces.
    • Make sure you set your TV's audio output to TV speakers. Turn up the volume, and then verify that sound is coming out of the speakers.
    • For larger rooms, consider placing your rear speakers closer to the listening area.
    • Ensure a quiet environment during the calibration process for the best results.
    • If the issue persists, restart your speakers and Fire TV device. Then try to set up Alexa Home Theater again.
  • If you experience issues with the quality of the audio:
    • Play audio from different streaming services to ensure that the issue isn’t provider specific.
    • Set up your Alexa Home Theater again:
      1. Go to Settings from your Fire TV menu.
      2. Select Display & Sounds.
      3. Select Alexa Home Theater.
      4. Select Edit Alexa Home Theater.
      5. Select Unpair and confirm.
      6. To set up again and recalibrate your system, select Create Alexa Home Theater.

Back to top