Safety and Compliance Information for Amazon Fire TV Soundbar

IMPORTANT PRODUCT INFORMATION

Safety and Compliance Information for Fire TV Soundbar

Warning symbol: Triangle with exclamation mark SAFETY INFORMATION

READ ALL SAFETY INFORMATION BEFORE USING THE DEVICE. FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE.

CHOKING HAZARD - SMALL PARTS. Small parts contained in your device and its accessories may present a choking hazard to small children.

Maintaining Your Fire TV Sound Bar

Heed all warnings.

Follow all instructions.

Clean only with a dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other unit (including amplifiers) that produce heat.

Only use the provided plug with an appropriate outlet. If the provided plug does not fit into your outlet, do not force the plug into the outlet.

Protect the power cord from being walked on or pinched particularly at the ends where the plug is located, near convenience receptacles, or where they exit from the unit.

Unplug this unit during lightning storms or when unused for long periods of time.

Refer all servicing to qualified service personnel. Servicing is required when the unit has been damaged in any way, such as when the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the unit, the unit has been exposed to rain or moisture, does not operate normally, or has been dropped.

Always use the accessories recommended by the manufacturer to ensure compatibility.

When moving your unit from an area of low temperature to an area of high temperature, condensation may form in the housing. Wait before turning on your unit to avoid causing fire, electric shock, or component damage.

Slots and openings in the back and bottom of the unit are provided for ventilation. To ensure reliable operation of your unit and to protect it from overheating, be sure these openings are not blocked or covered. Do not place your unit in a bookcase or cabinet unless proper ventilation is provided.

Never push any object into the slots and openings on your unit. Do not place any objects on the top of your unit. Doing so could short circuit parts causing a fire or electric shock. Never spill liquids on your unit.

Do not block the speaker ports. Allow for 1-2 inches of space around all sides for ventilation.

When connected to a power outlet, power is always flowing into your unit. To totally disconnect power, unplug the power cord.

Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

The wall socket should be located near your unit and be easily accessible.

Keep your unit away from moisture. Do not expose your unit to rain or moisture. If water penetrates into your unit, unplug the power cord. Continuous use in this case may result in fire or electric shock.

Do not use your unit if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair your unit yourself.

Avoid using dropped or damaged appliances. If your unit is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of your unit may cause fire or electric shock.

Do not install your unit in an area with heavy dust or high humidity. Operating your unit in environments with heavy dust or high humidity may cause fire or electric shock.

Ensure that the power cord and any other cables are unplugged before moving your unit.

When unplugging your unit, hold the power plug, not the cord. Pulling on the power cord may damage the wires inside the cord and cause fire or electric shock. When your unit will not be used for an extended period of time, unplug the power cord.

To reduce risk of electric shock, do not touch the connector with wet hands.

Read and follow all warnings printed on the unit.

WARNING: This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near the equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain, or moisture.

If the main wall plug or the appliance coupler is disconnected, the disconnected device will remain readily operable upon reconnection to an appropriate power source.

No open flames, such as lighted candles, should be placed on the unit.

The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.

Warning symbol: Triangle with exclamation mark WARNING: If you mount this device on a wall, follow the instructions exactly as set out in the instructions provided with the wall mount. If it is not correctly mounted, the device may slide or fall and cause injury to a child or adult and damage to the device. Make sure to use only screws and other hardware included with the mounting kit.

If you install this device on a wall, do not drill or screw into any wires or pipes contained in the wall. Doing so could cause potential hazards or property damage.

Install device only on a flat wall or surface.

Your device has two mounting slots on the back. The mounting rings must be securely attached using both holes. If you do not use both rings, your device may fall and cause property damage or personal injury. See the documentation that came with your wall mount for complete mounting instructions.

Warning symbol: Triangle with exclamation mark BATTERY SAFETY

The remote control included with this product contains alkaline batteries and requires them for use. Only use new 1.5V alkaline or 1.2 NiMH rechargeable AAA-sized batteries. Never mix old and new batteries. Keep all of the batteries out of the reach of children. If any batteries begin to leak, take steps to prevent the fluid from coming into direct contact with skin or clothes as the fluid could be corrosive and may be toxic. Remove the batteries and clean the battery compartment in accordance with the battery manufacturer's recommendations.

Insert the remote control batteries in accordance with instructions. Incorrect polarity may cause the battery to leak which can damage the remote control or injure the operator.

CAUTION: Danger of explosion or fire if batteries are mistreated. Replace only with the same or specified type.

Do not leave the batteries exposed to direct sunlight for a long period of time with doors and windows closed. Do not disassemble the batteries or dispose of it in fire.

Refer to the Safety & Compliance section on https://www.amazon.com/devicesupport for additional information.

When this device is plugged into an electrical socket-outlet, unplugging this device will disconnect it from the AC mains supply. Only plug this device into an easily accessible socket-outlet. Devices with a power cord must be located near the socket-outlet.

If this device is used to power other devices, those powered devices must be located near this device.

Warning symbol: Triangle with ear AVOID PROLONGED LISTENING AT HIGH VOLUME. Prolonged listening of the player at high volume can damage the ear of the user. To prevent possible hearing damage, users should not listen at high volume levels for long periods.

PRODUCT SPECIFICATIONS

Fire TV Soundbar

Model Number: EVG487

Electrical Rating: 100V -240V, 50/60Hz, 60W

Operating Temperature Range:

0°C to 35°C (32°F to 95°F)

Fire TV Soundbar Remote

Electrical Rating: 3.0V⎓ 2 (AAA) batteries.

Operating Temperature Range: 0°C to 35°C (32°F to 95°F)

Using Your Device Around Other Electronic Devices

Your device generates, uses, and can radiate radio frequency (RF) energy and, if not used in accordance with its instructions, may cause interference to radio communications and electronic equipment. External RF signals may affect improperly installed or inadequately shielded electronic operating systems, entertainment systems, and personal medical devices. While most modern electronic equipment is shielded from external RF signals, if in doubt, check with the manufacturer. For personal medical devices (such as pacemakers and hearing aids), consult with your physician or the manufacturer to determine if they are adequately shielded from external RF signals.

FCC COMPLIANCE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Pursuant to Section 15.21 of the FCC rules, changes or modifications to a Product by the user that are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The device meets the FCC Radio Frequency Emission Guidelines. Information on the product is on file with the FCC and can be found by inputting such Product's FCC ID (which can be found on the device) into the FCC ID Search form available at https://www.fcc.gov/oet/ea/fccid.

The party responsible for FCC compliance is Amazon.com Services LLC 410 Terry Ave North, Seattle, WA 98109 USA. If you wish to contact Amazon visit https://www.amazon.com/devicesupport, select United States, click Help & Troubleshooting, then click on Contact Us.

Device Name: Fire TV Soundbar

Model: EVG487

Device Name: Fire TV Soundbar Remote

The output power of the radio technology used in the Products is below the radio frequency exposure limits set by the FCC. Nevertheless, it is advised to use the Products in such a manner that minimizes the potential for human contact during normal operation. This device should be installed and operated with at least 20 cm between the radiator and your body.

RECYCLING YOUR DEVICE PROPERLY

In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of, or recycle, your device in accordance with your local laws and regulations. For information about recycling your device, go to https://www.amazon.com/devicesupport.

LEGAL TERMS

Please read the terms found at https://www.amazon.com/devicesupport.

Additional Information

You can find the Terms of Use, Limited Warranty, instructions for using the Device, customer service contact information, and other applicable terms and Device information at https://www.amazon.com/devicesupport. See the Legal Notices in this product or in the App for other applicable notices.