How to Pair and Use Your Kindle Click

Kindle Click is a wireless page turner that connects to your Kindle via Bluetooth. Once paired, use it to turn pages without touching the Kindle screen.

Note: Kindle Click works with Kindle models from 2024 and later, running the latest Kindle software. To check compatibility, go to Kindle Devices compatible with Kindle Click.

Table of Contents

Pair Kindle Click Remote

  1. Charge the Kindle Click remote via USB-C for at least 15 minutes, then hold a front page-turn button for two seconds.
  2. The LED indicator near the USB-C port pulses blue, indicating the remote is ready to pair.
    Note: If the LED indicator is not lit, charge Kindle Click for at least 15 minutes using a USB-C cable. Then press any button and try again.
    1. Turn on the Bluetooth on your Kindle through Settings and then Wi-Fi & Bluetooth.
    2. Select Wi-Fi & Bluetooth
  3. On your Kindle, turn on Bluetooth and open the Bluetooth Devices  list.
  4. Select  Bluetooth Devices  and wait for  Kindle Click to appear in the list, then select it. Follow the on-screen prompt on your Kindle and complete pairing. After pairing, Kindle Click is ready to use.
  5. Follow the on-screen tutorial to learn about the Kindle Click controls.
  6. To test the Kindle Click, open any book on your Kindle. Press the two large front buttons to turn pages. Use the side buttons to adjust screen brightness.

Back to top

Switch Kindle Click to Another Kindle

Kindle Click pairs with one Kindle at a time, and you can switch it to a different Kindle anytime:

  1. On the Kindle that Kindle Click is paired with, go to Settings, then Wi-Fi & Bluetooth, then Bluetooth Devices. Select Kindle Click, then select Forget.
  2. On Kindle Click, press and hold the lower front page-turn button and the brightness-down button together for about 10 seconds, until the light flashes pink three times. Then release.
  3. You will see the light pulsing blue. Kindle Click is now ready to pair.
  4. On the Kindle you want to use, go to Settings, then Wi-Fi & Bluetooth, then Bluetooth Devices, and select Kindle Click. Follow the on-screen prompts.

Follow the same steps to use Kindle Click with your previous Kindle again. If you run into issues and want to reset Kindle Click, visit How to Reset/Factory Reset Your Kindle Click.

Back to top

Kindle Click Controls

Use your Kindle Click remote to turn page, adjust brightness, and put your device to sleep:

  • Turn pages while reading a book: press the two large front page-turn buttons to turn pages while reading.
  • Adjust screen brightness: Use the side brightness buttons to adjust the brightness.
  • Put your Kindle to sleep: Press and hold both side brightness buttons together.
    Note: Kindle Click can put a Kindle to sleep but cannot wake a sleeping Kindle.

To customize the page turn directions:

  1. Go to Settings
  2. Select Accessories
  3. Select Kindle Click
  4. Under Page control, customize the page-turn buttons per your preference.

To check battery and firmware:

  1. Go to Settings
  2. Select Accessories
  3. Select Kindle Click

View your remote's connection status, battery percentage, and firmware version.

Manage multiple remotes:

  • A Kindle can be paired with multiple Kindle Click remotes.

Back to top

LED Light Status & Charging

The light on your kindle click is off during normal use. An unlit light does not mean the remote is disconnected or out of charge

Light What it means

Blue, slow pulse

Ready to pair

Blue, brief solid

Pairing complete

Orange

Charging

Green

Fully Charged

Red (1 flash)

Battery below 20% - charge soon

Red (3 flashes)

Battery below 5% - charge now

Back to top

Video Guide to Set Up and Use Kindle Click

Back to top