Applying Your AmazonBasics Microwave and Smart Oven Braille Keypad Overlay
How to apply the tactile Braille overlays for Amazon Basics Microwave and Smart Oven.
The Braille tactile overlay is a sticker, sized to exactly fit the appliance control area on the AmazonBasics Microwave and Amazon Smart Oven, with Braille labels to help locate and identify the buttons on the appliance.
Read through all the following instructions before beginning.
To apply the overlay:
- If your device is new, remove the protective film covering the control area. If it is not new, clean and dry the control area before applying the overlay.
- A small paper tab identifies the top left of the overlay. Use the tab to fold the top square of the backing down. Do not tear off the tab because you will use it later. Be careful not to let the sticky part of the overlay touch anything until you are ready.
- Carefully line up the bottom of the overlay inside the bottom edge of the control area. Make sure the left and right edges of the overlay are inside the frame.
- Holding the bottom of the overlay in position, smooth it into place from the bottom to top. Take care to avoid wrinkles or bubbles.
- Pull down on the paper tab to peel away the rest of the backing. Be careful to hold the sticker away from the control area until you are ready.
- Use one hand to hold the bottom of the overlay away from the appliance. Use the other hand to smooth the overlay down from top to bottom. Take care to avoid wrinkles or bubbles.
- Scratch at a corner of the overlay to start peeling away its protective film.
