Safety and Compliance Information
Safety and Compliance Information for Amazon Smart Plug
Use Responsibly. Read all instructions and safety information before use.
FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE.
Maintaining Your Amazon Smart Plug
Use your Amazon Smart Plug ("Device") only in indoor, dry environments. See below for operating and storage temperatures for the Device. Do not use your Device near sinks or other wet locations. Take care not to spill any food or liquid on your Device and do not put any object filled with a liquid, such as a vase, on or near your Device. If your Device does get wet, carefully unplug the Device without getting your hands wet and wait for the Device to dry completely before plugging it in again. Do not attempt to dry your Device with an external heat source, such as a microwave oven or hair dryer.
Only handle your Amazon Smart Plug with clean hands. Remove your Device from an outlet before cleaning. Clean the Device with a soft cloth. Do not clean with liquid.
Do not expose your Device to steam, extreme heat or cold. For example, do not plug in your Device near any heat sources such as space heaters, heater vents, radiators, stoves, or other things that produce heat. See below for operating temperatures for the Device.
If you wish to turn off your Device press the on/off button on the side of the Device. To turn your Device back on, press the on/off button again. If you wish to stop power from flowing into your device, unplug the Device.
Do not force your Amazon Smart Plug into a power outlet. If your Amazon Smart Plug appears damaged, discontinue use immediately. Overloading a socket can cause it to overheat and may result in a fire.
Your Amazon Smart Plug may get warm during normal use. To reduce the risk of overheating or heat-related injuries, keep the Amazon Smart Plug well ventilated and use care when handling it.
Servicing Your Device
If your device needs service, please contact Amazon Customer Support. Contact details can be found at .
Faulty service may void the warranty.
Other Safety Considerations
- Do not remove your Amazon Smart Plug's ground pin (the middle pin).
- Install your Device in an easily accessible outlet near the equipment that will be plugged into the device.
- Before plugging equipment into your Amazon Smart Plug, make sure the equipment is turned off.
- Your Amazon Smart Plug is not intended for use with medical or life support equipment. Accordingly, your Amazon Smart Plug should not be used to supply power to, or control the on and off statuses of, medical or life support equipment.
- If the equipment you plug into your Amazon Smart Plug is used in a way not specified by the manufacturer, any protection provided by the equipment may be impaired.
- Do not use your Amazon Smart Plug to operate equipment where inaccurate timing or accidental on/off commands could be dangerous (e.g., saunas, sunlamps, etc.).
- Plug your Amazon Smart Plug directly into an electric outlet and not into an extension cord or a power strip.
- Do not use your Amazon Smart Plug to operate equipment where continuous or unsupervised operation could be dangerous (e.g., stoves, or heaters).
- Do not overload your Amazon Smart Plug by plugging equipment into it that exceeds your Amazon Smart Plug's electrical rating or by plugging a power strip into your Amazon Smart Plug.
- Do not connect your Amazon Smart Plug into another Amazon Smart Plug.
- Only for use in dry rooms.
- Do not touch your Amazon Smart Plug or any equipment connected to it during a lightning storm.
- Small parts contained in your Device may present a choking hazard to small children.
Using Your Amazon Smart Plug Around Other Electronic Devices
Amazon Smart Plug generates, uses, and can radiate radio frequency (RF) energy and, if not used in accordance with its instructions, may cause interference to radio communications and electronic equipment. External RF signals may affect improperly installed or inadequately shielded electronic operating systems, entertainment systems, and personal medical devices. While most modern electronic equipment is shielded from external RF signals, if in doubt, check with the manufacturer. For personal medical devices (such as pacemakers and hearing aids), consult with your physician or the manufacturer to determine if they are adequately shielded from external RF signals.
FCC Compliance Statement
The Amazon Smart Plug (the "Product") complies with part 15 of the FCC Rules. Operation of each Product is subject to the following two conditions: (1) this Product may not cause harmful interference, and (2) this Product must accept any interference received, including interference that may cause undesired operation.
Note: This Product has been tested and found to comply with the limits for a Class B digital device or external switching power supply, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. The Product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this Product does cause harmful interference to radio or television reception, which can be determined by turning the Product off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Pursuant to Section 15.21 of the FCC rules, changes or modifications to a Product by the user that are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device meets the FCC Radio Frequency Emission Guidelines. Information on the product is on file with the FCC and can be found by inputting such Product's FCC ID (which can be found on the device) into the FCC ID Search form available at transition.fcc.gov/oet/ea/fccid.
The party responsible for FCC compliance is Amazon.com (http://amazon.com/) Services LLC
410 Terry Ave North, Seattle, WA 98109 USA
If you wish to contact Amazon visit www.amazon.com/devicesupport (http://www.amazon.com/devicesupport), select United States, click Help & Troubleshooting, then scroll to the bottom of the page and under the Talk to an Associate option, click on Contact Us.
Device Name: Amazon Smart Plug
Model: C2YY37
Information Regarding Exposure to Radio Frequency Energy
The output power of the radio technology used in the Product is below the radio frequency exposure limits set by the FCC.
Nevertheless, it is advised to use the Product in such a manner that minimizes the potential for human contact during normal operation.
This device should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Recycling the Amazon Smart Plug Properly
In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of or recycle the Product in accordance with your local laws and regulations. For information about recycling, go to .
Product Specifications
Model Number: C2YY37
Input:
120 V ~, 60 Hz, 15 A max
Output:
120 V ~, 60 Hz, 15 A, resistive load
120 V ~, 60 Hz, 10 A, inductive load
120 V ~, 60 Hz, 1/2 HP, motor load
120 V ~, 60 Hz, 600W (TV-5), incandescent
Type 1.B action, operating control
Pollution degree 2
Rated Impulse voltage 1500V
Connectivity: *Wi-Fi 2.4G 2412-2472 MHz; BLE 2402-2480 MHz
Operating temperature: 32°F to 95°F (0°C to 35°C)
Additional Information
You can find the Terms of Use, 1-Year Limited Warranty, instructions for using the Device, Customer Service contact information, and other applicable terms and Device information at .
